Out of stock

Speedo Womens's LZR Racer Elite and LZR Racer Pro sizing chart

22 31⅛" 25⅝" 53½"
23 32" 26" 55⅛"
24 33½" 26⅜" 56¾"
25 35½" 27½" 60¼"
25L 35½" 27½" 61¾"
26 36½" 28⅜" 62⅛"
26L 36½" 28⅜" 63¾"
27 38" 29⅛" 64⅛"
27L 38" 29⅛" 65¾"
28 39" 29⅞" 66⅛"
28L 39" 29⅞" 67¾"
29 40" 30¾" 68⅛"
30 41" 31½" 68½"
32 42" 33" 69⅝"
34 44" 34⅝" 70⅞"
36 44" 35¼" 72⅛"


A few simple steps will help you stay calm and get your suit on efficiently:

*First and foremost, make sure your body is completely dry and your fingernails are short, to avoid damaging the material.

1. Turn up the bottom of each leg so the silicone grip strip is on the outside.

2. Carefully put it on, one leg at a time, pulling up the material little by little, like tights.

3. Repeat with the other leg.

4. Make sure it fits tightly at the crotch, and that you’ve gathered up as much material as possible at the hips in order to be able to pull it over your buttocks more easily.

5. Slide the suit up over your hips.

6. Make sure the inside grip strips are placed about one inch above the start of each buttock.

Women’s Tech Suits:

* Complete steps 1 through 6.

8. Once you’ve got it past your hips, slide the suit up over your chest.

9. Slip one arm at a time into the armholes, smoothing out any bunches or wrinkles carefully one last time. You may need help at this point.

10. Make sure the seams are where they’re supposed to be, and that the suit is properly adjusted, then turn the cuffs back down, so the grip strips are inside.

11. Turn the cuffs back down, so the grip strips are on the inside.

Measuring Tips

A - Height: To determine your height, stand up straight and measure the distance from the crown of your head to the sole of your foot
B - Chest: Take the measurement over the fullest part of your bust.
C - Waist: Measure around the narrowest part of your waistline.
D - Hips: Measure around the fullest part of your hips.
E - Torso loop: In a loop, measure from the highest part of the shoulder, beneath the crotch and then back to the starting point.


The FINA-approved Speedo LZR Elite 2 Recordbreaker Kneeskin benefits from low-drag fabrics and world-leading technology to maximize swimming performance and racing efficiency. This high-performance suit uses LZR Pulse+ Fabric technology, re-engineered for 40% more durable water repellency. This state-of-the-art fabric contours the body and reduces muscle oscillation to make it more hydrodynamic. Compared to sewn seams, the fully bonded, ultrasonically welded seams form a sleek surface and reduce skin friction drag by 6%. Silicone leg grippers ensure a snug, solid fit to enhance a swimmer’s confidence in their performance.

  • FINA approuved 
  • Open back
  • LZR Pulse+ Fabric Technology features 40% more durable water repellency as compared to LZR Racer Elite, full body compression reduces muscle oscillation and contours the body into an efficient hydrodynamic shape
  • Fully bonded, ultrasonically welded seams create a smooth surface, reducing skin friction drag by 6% versus sewn seams
  • Silicone leg grippers ensure a snug, solid fit for confidence in your performance
  • Reflective Speedo logo


More Information

More Information
Composition65% Nylon, 35% Spandex
Swimmer ProfileCompetitive
Please log in or create an account to write a review.